Content
For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.
The door opening detector is a magnetic contact for protecting large (garage) doors. Unauthorised opening is detected and reported to the alarm panel. The door opening detector is mounted chiefly on roll-up, sliding, and up-and-over doors. The detector consists of a magnetic contact (reed) and a magnet. These are fitted parallel to each other. The electric circuit of this NC opening detector is normally closed (NC). If the distance between reed and magnet increases, the circuit is broken and an alarm reported. The detector is tamper-protected. The best installation location is in the middle of the entrance. The magnetic contact is mounted on the ground and the magnet on the inside of the door at a distance of about 20 mm. The door opening detector is perfectly suited for surface-fitting. It is absolutely water and dust-proof (IP 68). Its extremely robust aluminium housing protects it from damage even when driven over.<CRLF>
Art. no.: | MK4000 |
Installation type: | Surface mounting |
Colour: | other |
Dimensions: | (WxHxD) 180x14x45 mm |
Connections: | NC, max. contact capacity 60 V DC/AC/1 A/10 W |
Width: | 13 mm |
Type of detection: | Magnetic field measurement |
External field protection: | |
Housing material: | Aluminium |
Height: | 230 mm |
Cable type: | 4-core |
Cable length: | 2 m |
Compatible with: | Secoris, Secvest, Terxon |
Length: | 45 mm |
Max. operating temperature: | 50 °C |
Installation location: | Setup, optimal triggering clearance 20 mm |
Sabotage monitoring: | |
IP protection class: | 65 |
Sensor type: | Reed contact |