For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.
The Profi motion detector is a passive infrared motion sensor (PIR sensor). It reacts to all types of heat movement and reports this to the alarm center. The best place to install the equipment is in a corner, between 2 and 3 meters above the floor. The intruder's possible direction of movement should be at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating) or a window. Do not install the motion sensor near to electric cables, gas lines, or electronic equipment that generate heat during long periods of operation. The viewing angle of the Profi motion detector sensor is 90 degrees, and the detection range – depending on installation height – up to 15 x 15 meters. You can vary the sensitivity of the sensor with a jumper. This way, you can define the number of pulses that have to be detected before the sensor opens the alarm relay. The Profi motion detector sensor has an alarm memory. If the alarm center is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the configuration, you can also see which motion sensor first triggered the alarm.
| Art. no.: | BW8010 |
| Installation type: | surface mounting |
| Depth: | 48 mm |
| Dimensions: | (WxHxD) 60x106x47 mm |
| Alarm memory: | |
| Connections: | NC, 50 mA, 24 V DC |
| Display: | |
| Width: | 60 mm |
| Type of detection: | Heat detection |
| Adjustable sensitivity: | |
| Detector coverage area (m): | 15 m |
| Housing material: | ABS |
| Height: | 107 mm |
| Pulse selector switch: | |
| Length: | 47 mm |
| Power consumption: | 0,12 W |
| Max. operating temperature: | 55 °C |
| Installation location: | Wall |
| Net weight: | 0,08 kg |
| Sabotage monitoring: | 1 |
| Sensor type: | Dual PIR |
| DC voltage supply: | 12 V |
| Status display: | |
| Power consumption: | 10 mA |
| Anti-creep protection: | |
| White-light filter: |
Belgique
België
Brasil
Canada (EN)
Canada (FR)
Deutschland
España
France
International
Italia
Magyarország
México
Nederlands
Österreich
Polska
Portugal
România
Schweiz
Suisse
Sverige
Svizzera
USA
United Kingdom
tiếng Việt
Україна
