Content
For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.
Never worry about water damage again
The Secvest wireless flood detector is a technical detector for the Secvest wireless alarm system. It consists of a basic device (detector) and a water sensor connected by a cable. When the sensor comes into contact with water, the detector informs the alarm panel and an alarm is triggered.
Locations and function
The sensor of the wireless flood detector should be mounted very close to the floor, usually in places that flood first when water damage occurs (such as the tiles behind the washing machine or surfaces near water pipes). If water is detected, an alarm is triggered – even when the alarm system is not armed. Furthermore, you can define whether you are notified by text message or telephone when an alarm is triggered.
Additional security precautions
It is also possible to connect to the washing machine, in order to switch it off immediately if water is detected.
Art. no.: | FUWM50000 |
Dimensions: | (WxHxD) 33x89x29 mm |
Battery - type: | 3V CR2 lithium battery |
Width: | 33 mm |
Type of detection: | Resistance measurement |
Radio frequency: | 868,6625 MHz |
Radio power: | 10 mW |
Housing material: | ABS |
Height: | 89 mm |
Compatible with: | Secvest, Terxon, BUMO60040 |
Length: | 29 mm |
Max. operating temperature: | 50 °C |
Max. transmission range (free field): | 100 m |
Max. transmission range (building): | 30 m |
Min. operating temperature: | -10 °C |
Modulation: | FM |
Net weight: | 0,09 kg |
Sabotage monitoring: | |
IP protection class: | 31 |
Sensor type: | Contact sensor |
Security level: | 2 |
Voltage monitoring: | |
DC voltage supply: | 3 V |
Status display: | |
Environmental class: | II |
Secvest Wireless Alarm System FUAA50000 |