Content
For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions
The inside siren is installed inside your building. It is the last and critical module of a complete alarm chain. The inside siren is an acoustic signal generator. You have a choice between two alarm modes in this case: A 110 dB alarm and a 90 dB acknowledgement tone. Both signals are felt to be extremely loud due to the high acoustic pressure and the signal frequency. The remotely activated LED of the alarm siren can be used to detect the status of the alarm panel (armed/disarmed). The rugged plastic housing (IP 54) of the acoustic signal generator is protected against sabotage by a wall and cover contact. The inside siren is powered with 12 V.
Art. no.: | SG1250 |
Dimensions: | (WxHxD) 100x155x48 mm |
Width: | 100 mm |
Housing material: | ABS |
Height: | 155 mm |
Length: | 48 mm |
Power consumption: | 3,6 W |
Light source: | LED |
Battery - max. battery life: | 50 y |
Min. operating temperature: | -10 °C |
Installation location: | Indoors |
Sabotage monitoring: | |
Sound pressure: | 90/110 dB |
IP protection class: | 54 |
DC voltage supply: | 12 V |
Power consumption: | 300 mA |
Subscribe to our newsletter
View ABUS YouTube movies
Partner Areas
Video Surveillance, Alarm Technology & Mechatronics
Key Ordering
Planning Tool Locking Systems